Miele DAS 4630 - Sign out of Wifi (Reset to Factory Settings)

Before using for the first time
20
 Start the WPS connection on your
WiFi router.
When successfully connected, 2and
3will light up constantly.
 Quit connection mode on the cooker
hood by touching the run-on option
control.
The cooker hood can now be operated
via the app.
If the connection fails, you have
probably not activated WPS on your
router quickly enough. Repeat the steps
above.
Tip: If your WiFi router does not support
WPS, please connect via the Miele app.
Sign out of WiFi (reset to factory
settings)
To set up a new WiFi connection, the
existing WiFi connection must be
disconnected.
 Touch the On/Off switch.
All symbols light up with reduced
brightness.
 Press and hold the run-on option
control until the grease filter
and charcoal filtersymbols light
up.
 Touch 1.
If a WiFi connection exists, 2and 3will
light up constantly.
The cooker hood will be ready for
disconnection in the next 2minutes.