Changing settings
31
All the indicator lights will go out.
If you do not confirm your selection of
setting within 4minutes, the rangehood
will revert to the previous setting.
Buzzer for the sensors
When a function is selected with the
sensors, a short buzzer will sound for
confirmation.
The buzzer can be switched off.
Touch the On/Off sensor.
All symbols light up with reduced
brightness.
Press and hold the run-on option
control until the grease filter
and charcoal filtersymbols light
up.
Touch the B control.
The buzzer is switched off.
If you want to switch the buzzer on
again, proceed in the same way.
Regardless of the previous setting, the
buzzer will be reactivated when power
is restored to the rangehood after it
has been disconnected from the
mains electricity supply or after a
power cut.
To Next Page
Loading...
