IMPORTANT SAFETY INSTRUCTIONS
13
If the power cord is damaged, it must be replaced with a special
power cord (see “Electrical connection” under “Installation”).
During installation, maintenance and repair work, the appliance
must be disconnected from the main electricity supply. It is only
completely isolated from the electricity supply when:
- The circuit breakers have been switched off, or
- The fuses of the electrical installation have been completely re-
moved, or
- Unplug (if plug present) the machine from the outlet. Pull the plug
not the cord.
If the steam oven is installed behind a cabinet front (e.g., a door),
do not close the cabinet front while the steam oven is in use. Heat
and moisture can build up behind the cabinet front when closed.
This can result in damage to the steam oven, the housing unit, and
the floor. Leave the door panel open until the steam oven has cooled
down completely.
To Next Page