Cleaning and care
166
Hold the door securely at both sides
and lift it evenly upwards off the
hinge retainers.
Make sure that the door is straight.
Place the door on the previously pre-
pared surface.
Fitting the door
Hold the door securely on both sides
and carefully fit it back into the door
hinge retainers.
Make sure that you fit the door
straight.
Open the door fully.
If the locking clamps are not locked,
the door could become loose, result-
ing in damage.
Always ensure that the locking
clamps are locked after refitting the
door.
To relock the locking clamps, turn
them back up to the horizontal posi-
tion as far as they will go on both
door hinges.
To Next Page
Loading...
