Networking with Miele built-in appliances
35
Networking enables the drawer to
operate automatically depending on the
operational status of another Miele
built-in appliance.
Example:
The drawer heats dishes at the right
time before or after using the networked
built-in appliance.
Pre-requisites
The following conditions must be met
for networking the drawer with other
built-in appliances:
– The drawer is connected to the
household Wi-Fi network via
Miele@home.
– The other built-in appliance is
connected to the household Wi-Fi
network via Miele@home.
Carrying out the networking
Networking is carried out via the
Miele@mobile App as normal.
See “Before using for the first time –
Setting up Miele@home” as well as the
Miele@mobile App for detailed
information about this function.
Operation via the sensors has
precedence over operation via the
App.
To Next Page
Loading...
