Additional functions
Delay start
The start time of a programme can be delayed, e.g. to benefit
from economy rates of electricity. A delay start time of
between 15 minutes and 24 hours can be selected. The delay
start time is set in 15 minute steps.
,
When using the Delay start function, make sure that the
detergent compartment is dry before adding detergent.
Wipe dry with a cloth if necessary. If the compartment is
wet, powder detergent can become lumpy and stick to the
dispenser, with the result that it is not fully dispensed.
Do not use liquid detergent when selecting Delay start, as
it can run into the dishwasher before it is required.
,
To prevent children coming into contact with
dishwasher detergent do not fill the detergent dispenser
until just before starting the programme, i.e. before
pressing the Start button.
^ Open the door.
^ Switch the dishwasher on using the On button g.
The On indicator light g comes on.
^
Select the programme you want from the main menu.
^
Select the "Delay start d" function.
The current time of day and the last start time selected will
appear in the display. The display will also show the end time
for the programme. The d indicator light will come on.
} +
Start time
12:00
12:00
} -
Finish at
13:32
OK }
^
Use
+/- to set the time you want the programme to start at.
If the button is kept pressed in, the time will automatically
decrease or increase. The end time alters accordingly
automatically.
Operation
40
To Next Page
Loading...
Need help?
General
