Save extras
You can set additional functions e.g. a
longer drying time, for individual
programmes (see "Operation, Selecting
an Extra").
You can use the
Save extras option to
save settings you have chosen for a
particular programme so that they are
automatically selected when you run
the programme in the future.
The dishwasher is delivered with this
function deactivated.
^
Select the option you want and
confirm this with
OK.
Temperature
You can chose for the temperature to
be displayed as °C/Celsius or
°F/Fahrenheit.
The temperature is set at the factory to
be displayed in °C.
^
Select the option you want and
confirm this with
OK.
Buzzer
When the buzzer is activated, an
audible tone sounds at the end of a
programme and when there is a fault.
The buzzer is activated as standard at
the factory.
The buzzer will still sound if there is a
fault, even if it has been deactivated.
Buzzer at the end of a programme
You will hear the buzzer at the end of a
programme in bursts of five with a short
pause in between. The buzzer will
continue to sound for up to an hour if
you do not switch the dishwasher off.
Buzzer when there is a fault
In the case of a fault, the buzzer will
sound continuously for up to two
minutes if you do not switch the
dishwasher off or correct the fault.
Settings menu J
75
To Next Page
Loading...
