Problem Possible cause Remedy
The In-operation
indicator is flashing
quickly.
In the display for the
"Without heater"
programme the
following fault
message appears:
Water intake temp. too
low
The intake water has
not reached the
required temperature of
45°C (see "Connection
to the water supply").
–
Start the programme again.
–
If the fault message
appears again, select a
different programme.
The In-operation
indicator is flashing
quickly.
The buzzer is
sounding.
The following
message appears in
the display:
Drain fault FXX
Before rectifying the problem
you must:
–
Switch the dishwasher off
with the Off button o.
Fault F11:
Water outlet is
restricted, water
remains in the wash
cabinet at the end of a
programme.
– Clean the filter
combination. See "Cleaning
and care".
– Clean the drain pump. See
"Problem solving".
– Clean the non-return valve.
See "Problem solving".
– Remove any kink in the
drain hose and make sure it
is laid correctly.
Problem solving guide
50
To Next Page
Loading...
