Technical Information
25
G 1xxx/G 2xxx
Figure D-7: G 2630, G 2732 Fascia Panel
1 PC interface 5 Cursor buttons
2 Delay start button 6 OK button
3 i (Information) button 7 Start button
4 RemoteVision (model-dependent) 8 On/Off button
1.3 Incognito
The Incognito (fully integrated) series dishwashers have the program controls
located on the top edge of the door, which can be accessed while the door is
open. Neither seen nor heard, the Miele Incognito Series OCI (Optical cycle
Indicator) allows you to see the progress of the dishwasher cycle by way of a
red light, which is steady or flashing depending on the status of the cycle.
Figure D-8: G x18x, G 2170 Fascia Panel
1 Intake/Drain LED 5 Program selection button
2 Rinse aid LED 6 On button
3 Salt LED 7 Off button
4 Program selection LEDs
Figure D-9: G 1262 Fascia Panel
1 Delay start button 5 Salt LED 9 Off button
2 Combi-Tab button 6 Program selection LEDs 10 Optical interface
3 Intake/Drain LED 7 Program selection button
4 Rinse aid LED 8 On button
Figure D-10: G x470 Fascia Panel
1 Delay start button 5 GlassCare LED 9 On button
2 GEL button 6 Salt LED 10 Off button
3 Intake/Drain LED 7 Program selection LEDs 11 Optical interface
4 Rinse aid LED 8 Program selection button
Figure D-11: G x472 Fascia Panel
1 Delay start button 5 Salt LED 9 Off button
2 Options button 6 Program selection LEDs 10 Optical interface
3 Intake/Drain LED 7 Program selection button
4 Rinse aid LED 8 On button
To Next Page
Loading...
Need help?
General
