Turning on
^ Open the water supply, if closed.
^ Open the door.
^ Make sure the spray arms can rotate
freely.
^ Turn the dishwasher on "K".
The "Start / Stop" indicator flashes and
the indicator next to the last program
selected is lit.
Selecting and starting a
program
Choose your program according to the
type of load and soiling. See the
"Program Guide" for more information.
^ Select the desired program with the
"Program" button.
The program indicator of the selected
program lights.
^ Press the "Start / Stop" button.
The program starts. The indicators for
"Start / Stop", "Rinse" and the program
selected will light up.
If the function "Turbo" is selected, the
relevant indicator will also light up.
Cancel a program only in the first
few minutes. Otherwise important
program steps may be interrupted.
Program sequence display
After a program has been started the
current stage of the program is
indicated by the program sequence
indicator.
Use
27
To Next Page
