Miele G 2472 - Table 18: Service Programming Mode Summary, G 2120;G 2140;G 2150; Table 19: Water Hardness Settings, G 2120;G 2140;G 2150

Technical Information
28
G 1xxx/G 2xxx
Function Programming Display
Activating/deactivating
improved drying
Press the Program
button 27x. Press the
Start/Stop button as
appropriate to make the
desired setting.
The "Rinse & Hold" LED flashes
2x slowly and 7x rapidly. "Rinse"
LED is off: Standard setting; "Rinse"
LED flashes: Improved drying –
depending on the program, drying
time is extended and the final rinse
temperature increased.
Appliance height setting
1
Press the Program
button 36x. Press the
Start/Stop button as
appropriate to make the
desired setting.
The "Rinse & Hold" LED flashes 3x
slowly and 6x rapidly. "Rinse" LED
is off: Standard appliance height
(G 1xxx); "Rinse" LED flashes: XXL
models (G 2xxx).
Model setting
1
Press the Program
button 38x. Press the
Start/Stop button as
appropriate to make the
desired setting.
The "Rinse & Hold" LED flashes 3x
slowly and 8x rapidly. "Rinse" LED
off: Models without drying fan;
"Rinse" LED flashes: Models with
UTT version 1 or 2.
Country setting
1
Press the Program
button 39x. Press the
Start/Stop button as
appropriate to make the
desired setting.
The "Rinse & Hold" LED flashes 3x
slowly and 9x rapidly. The "Rinse"
LED’s flash pattern indicates which
country is set: 1x: Europe; 2x:
Australia; 3x: USA; 4x: Japan; 5x:
Italy/Spain; 6x: Southern Europe.
2
Table 18: Service Programming Mode Summary, G 2120/G 2140/G 2150
1
If the electronic needs to be replaced during servicing, the following steps must be taken
during programming: In the first step, set the country specification and model, then switch
off the appliance. Repeat access and then set appliance width and height, and the
appropriate supply water hardness.
2
The SER country specification includes the following countries: Portugal, France, the
Netherlands, Belgium and Great Britain.
Save and quit:
Switch off the appliance.
Water Hardness [°d] Water Hardness [gpg]
Flash Pattern of "Rinse"
LED
1 – 4 1.1 – 4.3 1x rapidly
5 – 7 5.4 – 7.5 2x rapidly
8 – 11 8.6 – 11.8 3x rapidly
12 – 15 12.8 – 16.1 4x rapidly
1
16 – 20 17.1 – 21.4 5x rapidly
21 – 25 22.5 – 26.8 6x rapidly
26 – 30 27.8 – 32.1 7x rapidly
31 – 36 33.2 – 38.5 8x rapidly
37 – 50 39.6 – 53.5 9x rapidly
51 – 70 54.6 – 74.9 1x slowly
Table 19: Water Hardness Settings, G 2120/G 2140/G 2150
1
Standard setting.