installation
2. Install the mounting
brackets
To ensure stability this dishwasher
should be securely attached to the
countertop with the two mounting
brackets included,
[] Insert the tab of each bracket into the
guide holes on top,
Stone or marble counterops:
Do not install these mounting brackets
if the counter is made of an extremely
hard material, The securing screws for
the mounting brackets are not suitable
for such materials,
3. mnstaJJthe shale skis
Two slide skis are included and should
be installed on the feet of the
dishwasher before the machine is
pushed under the countertop, This will
allow the machine to slide easier,
protect the floor, and allow adiustment
of the rear leveling legs from the front of
the unit,
[] First, adjust the height of the legs so
rna_ _ne _oD_f me alsnwasner is
ougnly l/s /3 mm _elow the
coun[er_c o
Tipping _nemacnlne s gnuy to the rear,
if possible _A make aajushng the front
legs easier Make sure the machine is
leve wnen aa:usfmenfs are complete.
[] Place the skis, with the ratchet at the
rear, under the dishwasher legs,
14
To Next Page
Loading...
