Programme options
52
FlexiTimer with EcoStart
The FlexiTimer gives you three ways
of starting the programme by means of
delaying the start. You can set the start
time or the finish time of a programme.
You also have the option of taking
advantage of time variable economy
rates of electricity using the EcoStart
function.
When using the FlexiTimer, make
sure that the detergent compartment
is dry before adding detergent. Wipe
dry with a cloth if necessary. If the
compartment is wet, powder
detergent can become lumpy and
stick to the dispenser, with the result
that it is not fully dispensed.
Do not use liquid detergent as it can
run into the dishwasher before it is
required.
Open the door.
Switch on the dishwasher with the
button.
Select the programme you want.
Press the button.
The indicator will light up.
You can use the arrow buttons to
select the Start at, Finish at, or EcoStart
function or Back .
Confirm selection of the function you
want with OK.
The set time will appear and the hour
number block will be highlighted.
You can now enter the time you want
using the arrow buttons and
confirm with OK.
If, while you are setting the time, you do
not press any buttons for several
seconds, the display will revert to the
previous menu. You will then have to
enter your settings again.
To Next Page
Loading...
