Plumbing
81
The Miele waterproof anti-leak
system
As long as your dishwasher has been
installed correctly, the Miele waterproof
anti-leak system will protect you from
water damage throughout its lifetime.
Connection to the water
supply
Water in the dishwasher must
not be used as drinking water.
– The dishwasher may be connected to
a cold or hot water supply, max.
60 °C.
We would only recommend
connection to a hot water supply if it
is economical, e.g. a solar powered
supply. When connected to a hot
water supply all programme stages
which would otherwise be carried out
with cold water will be carried out
with hot water.
– The SolarSave programme (if
available) requires a hot water supply
of between 45 °C (minimum) and 60
°C (maximum).
The higher the water intake
temperature, the better the cleaning
and drying results.
To Next Page
