Problem solving guide
71
Water drainage fault
Problem Cause and remedy
The In-operation indica‐
tor is flashing quickly.
The buzzer is sounding.
The following fault is
shown in the display:
Drain
Before rectifying the problem:
Switch the dishwasher off with the button.
The water outlet is restricted.
There might be water in the wash cabinet.
Clean the filter combination (see "Cleaning and
care, Cleaning the filters").
Clean the drain pump (see "Maintenance").
Clean the non-return valve (see "Maintenance").
Remove any kink or loop in the drain hose.
To Next Page
Loading...
