Settings menu
96
Check filters
You can adjust the interval at which the
reminder to check the filters appears.
You can set an interval of between 30
and 60 programme cycles.
The reminder to check the filters is set
at the factory to appear after every 50
programme cycles.
Select the interval you want and con‐
firm with OK.
Soak
You can use this function to loosen
dried-on food residues in the pro‐
gramme selected.
Once activated, this function will be
carried out with all programmes until
you deactivate it.
If you are using powder dishwasher de‐
tergent, add approx. 5 g to compart‐
ment I.
Select the setting you want and con‐
firm with OK.
Pre-wash
You can use this function to remove
easily loosened food residues in the
programme selected.
Once activated, this function will be
carried out with all programmes until
you deactivate it.
Select the setting you want and con‐
firm with OK.
Brightness
There are seven different display bright‐
ness settings.
Select the brightness you want and
confirm this with OK.
To Next Page
Loading...
