Installing “Freestanding” dishwashers
“Freestanding” dishwashers
The dishwasher must be installed
and levelled.
Any unevenness in the floor level
can be compensated for by adjust-
ing the four screw feet.
The adjustment range is approx. 1 cm
(85-86 cm total height).
Decor frame and decor panel
“Freestanding” dishwashers can be
subsequently fitted with a decor frame
(standard feature with some models
only).
This enables the front of the dish-
washer to be fitted with a decor panel
to match the kitchen furniture.
Decor panels up to 1 mm thick:
Decor panel dimensions:
587 x 603 x 1 mm.
Decor panels up 1 to 4 mm thick:
Decor panel dimensions:
587 x 599 x 1 - 4 mm
With decor panels 1 to 4 mm thick, an
extra decor frame adapter strip (spe-
cial accessory) must be fitted to the
control facia panel.
Screw on the lower decor strip b.
Insert the decor panel c.
Screw the side decor strips into posi-
tion.
Installing “Freestanding” dishwashers
49
To Next Page
Loading...
