EasyManua.ls Logo

Miele G 686 - Rinse Aid System Setup and Dosage

Miele G 686
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Rinse aid
Rinse aid is necessary to ensure water
does not cling and leave marks on croc-
kery during the drying phase.
Rinse aid is poured into the storage
reservoir and the amount set is dis-
pensed automatically.
Make sure you have added rinse aid
before using the dishwasher for the first
time.
Inadvertently filling the rinse aid
reservoir with powder or liquid dish-
washer detergent always causes
serious damage to the reservoir.
Only pour rinse aid formulated for
domestic dishwashers into the reser-
voir.
Alternatively it is possible to use
Household vinegar with a max. 5%
acid content
Do not use vinegar with a higher
acid content (e.g. vinegar essence
25% acid). This must
not be used
as its use would damage the dish-
washer.
or
Liquid citric acid up to 50% acid con-
tent. The resulting rinsing and drying
quality will not, however, be as good
as when rinse aid is used.
Adding rinse aid
Press the button in the direction of
the arrow until the flap springs open.
Before using for the first time
18

Table of Contents

Related product manuals