At the end of a programme
A programme has finished when no in-
dicator lights are illuminated in the pro-
gramme sequence display (16) and a
“0” shows in the time display (15).
The dishwasher can now be opened
and unloaded (see the section “Unload-
ing the dishwasher”).
If the dishwasher is left closed the fan
will continue for a few more minutes to
diminish any remaining moisture. This
process is not part of the programme.
We recommend only opening the door
immediately a programme has ended if
you urgently need crockery or cutlery
from it.
For safety’s sake it is advisable to al-
ways switch the dishwasher off if you
do not wish to start another programme
immediately.
Switching off
At the end of a programme:
Turn the programme selector (18) to
“Stop”.
The decimal point in the time display
(15) and the light ring around the pro-
gramme selector light up.
Press and release the “On/Off” but-
ton (14).
The decimal point in the time display
(15) and the light ring around the pro-
gramme selector go out.
The dishwasher continues to use
electricity until switched off using
the “On/Off” button.
If the dishwasher is not to be used for a
longer period of time, e. g. whilst on
holiday, it is recommended that the
stopcock is turned off.
Operating the dishwasher
34
To Next Page
Loading...
