Operating the dishwasher
Programme selection
Choose your programme according to
the type of load and how dirty it is.
In most cases this will be a Normal Pro-
gramme, a Universal Programme or a
Universal Plus Programme.
These programmes are ideally suited to
everyday mixed loads with varying de-
grees of soiling.
For particular needs there are
special programmes.
The different programmes and their
uses are described in the programme
chart at the end of this booklet.
The additional function “Top Solo” can
be selected with each programme.
For further information see “Additional
functions/Top Solo”.
“Energy Save” programme
Use this programme for lightly to nor-
mally soiled dishes.
A hot water intake (temperature of the
incoming water) of at least 45 °C and
max. 60 °C is necessary for this pro-
gramme.
Water is not heated in this programme.
Only approx. 0.10 kWh of electricity is
used during this cycle.
As water is not heated, the drying re-
sults may not match those of other pro-
grammes.
The higher the temperature of the in-
take water, the better the cleaning and
drying results.
Open the door of the dishwasher at the
end of the programme to speed up the
drying process.
Operating the dishwasher
31
To Next Page
Loading...
Need help?
General
