Miele G 686 - Page 52

Problem Possible cause Remedy
Water remains in the
wash cabinet at the end
of a programme
Before rectifying the
problem:
– Turn the Programme
selector to the “Stop”
position.
– Switch the dishwasher
off using the “On/Off”
button.
The filter combination in
the wash cabinet is
clogged.
Clean the filter
combination, see
“Cleaning and Care”
The drain pump or the
non-return valve may be
blocked.
Clean the drain pump
and the non-return valve,
see section on this.
The drain hose is kinked. Remove the kink.
Problem solving guide
52