Switching on and off
k REACTIVATION
(see "Reactivating water softener").
q DRAIN,
if for example the programme has been
interrupted (n.b. observe preventive
measures to avoid infection):
– Press the I-0 button.
– Press the q programme touchpad.
– Press the "Start"-button h.
Programme sequence indicator
When a washing programme has been
selected, the indicator lights in the dis-
play will show the programme se-
quence.
I Pre-wash
l Wash/possibly disinfecting
m Interim rinse
H Final rinse
c Drying (additional programme)
DESIN Disinfection
(Only with the "B" SPECIAL pro-
gramme maintaining parameters
90-93 °C - 10’, 90-93 °C - 25’,
85 °C - 10’, or 85 °C - 25’)
When part of a programme is com-
plete, the corresponding indicator light
goes out.
The programme is completed when no
indicator lights are left on (expect for
"DESIN" for the "B" SPECIAL pro-
gramme) and when the "Start" h.light
goes out. The display panel will show
the total running time of the programme.
Switching off
Press the I-0 switch and let it spring
out.
The machine can now be opened and
unloaded.
Interrupting a programme
Once a programme is running it should
only be interrupted in extreme cases,
e.g.: when articles in the machine rattle
or bump against each other and have
to be rearranged.
The machine must then be switched
off, the water drained and the pro-
gramme restarted:
Switch the machine on and off again
with the I-0 switch.
Select the "DRAIN" programme (Ad-
ditional programmes)
On completion, open the door and
replace the items securely and cor-
rectly. Take any hygiene measures
necessary against infection and
wear protective gloves where
necessary.
Replenish the powder detergent dis-
penser in the door if necessary.
Close the door.
Reselect the programme.
Switching the machine on and off
26
To Next Page
Loading...
