Plumbing
Drainage
The drainage system is fitted with a
non-return valve which prevents dirty
water from flowing back into the ma-
chine via the drain hose.
The machine should preferably be
connected to a
separate drainage
system on site. If no separate drain-
age system is available, seek profes-
sional advice.
The machine is supplied with flexible
drain hoses with an internal diameter
of 22 mm and approx. 1.5 m long.
The drain hose must not be short-
ened.
Hose clamps for connection are sup-
plied.
Longer drain hoses (up to 4 m) are
available if required. Contact the
Miele Service Department.
The drainage system must not ex-
ceed 4 metres and the drain pump
has a maximum delivery head of 1
metre.
Ventilation of the wash cabinet
at rear
For machines without DHK Steam con-
densor, the rear ventilation of the wash
cabinet should be connected to an on-
site venting system.
Please refer to the Installation Instruc-
tions provided.
Plumbing
41
To Next Page
Loading...
