Progress indicator .................................................37
End of program ...................................................37
How to switch off ..................................................38
How to cancel a program ...........................................38
Programmable functions...........................................39
The following instructions apply to all programming functions:...............39
Activate the programming mode ...................................39
Saving to memory and exiting the programming mode ..................39
Exiting the programming mode without saving ........................39
DOS 1 dispensing (detergent)........................................40
Setting the liquid detergent dispensing concentration...................40
Priming the liquid detergent dispensing system .......................41
DOS 3 dispensing (neutralizer) .......................................42
Setting the neutralizer concentration ................................42
Priming the neutralizer dispensing system............................43
Buzzer ..........................................................44
How to restore the factory settings ....................................45
Data transfer (optional) ...........................................46
Machine care ....................................................47
Maintenance .....................................................47
Process validation .................................................48
Routine checks ...................................................48
Cleaning the filters in the wash cabinet.................................49
Cleaning the coarse filter .........................................49
Cleaning the flat and micro-fine filters ...............................50
Cleaning the spray arms ............................................51
Cleaning the control panel...........................................52
Cleaning the front of the appliance ....................................52
Cleaning the wash cabinet ..........................................52
Cleaning the door seal..............................................52
Dispensing systems................................................52
Baskets and inserts ................................................53
Troubleshooting..................................................54
Correcting faults .................................................62
Temperature sensor................................................62
Cleaning the non-return valve and drain pump...........................63
Cleaning the filter in the water inlet ....................................64
Contents
3
To Next Page
Loading...
Need help?
General
