While the program is running, any of the
following displays can be selected:
–
Actual temperature,
–
Elapsed program time and
–
Active wash block.
^
Press the "Display" ß button to
toggle between the displays.
Progress indicator
The indicator light for the active program
is lit while the program is running:
Recharging
Pre-Wash1+2
Wash1+2*
Rinse1-4/
Final rinse1+2
Dry
Complete (program parameters
achieved)
End of program
A program is completed when the
indicator light "Complete", in the
progress display, is lit and the indicator
light "Start" 6 goes out. A 0 will appear
in the middle of the display and all
other indicators will come on and go
out in sequence.
Simultaneously, a buzzer will sound for
approx. 30 seconds (standard setting).
The buzzer function can be changed
(see "Programming special functions").
Use the "Display" ß button to view the
total running time or current actual
temperature of a program.
As soon as a program ends, the
machine door should be opened
approx. 10 cm for 10 - 15 min. By
waiting to unload the machine, you will
be using the residual heat to help
obtain better drying results and resist
corrosion.
Operating the machine
37
To Next Page
Loading...
Need help?
General
