Resetting to factory default settings
Step Display / Result
^
Press 0 as often as necessary or hold it
pressed in until E33 appears in the display.
E33
^
Turn the programme selector to a programme.
Factory default setting:
Electronics have been programmed to another
setting:
00
PP
^
Press ß when PP shows in the display.
00, the factory default settings
have been reinstated.
The water softener has been reset to the factory default setting. It will need to
be reprogrammed; see "Programming the water softener".
Programme changes which have been made to the freely programmable
Programmes A, B and C will be kept and will not be reset.
Programmable functions
47
To Next Page
