Problem Possible cause Remedy
Three horizontal bars
show in the Time left
display at the end of the
programme: - - -
There may be a technical
fault.
–
Press the "Start/Stop"
button for at least one
second.
–
Switch the dishwasher
off using the "On/Off"
button.
After a few seconds:
–
Switch the dishwasher
on using the "On/Off"
button.
–
Then use the
programme selector
buttons to select the
programme you wish to
use.
– Press the "Start/Stop"
button
If the three horizontal
bars appear again at the
end of the programme,
there is a technical fault.
– Call the Miele Service
Department.
Knocking noise in the
wash cabinet.
The spray arm is
knocking against an item
in the basket.
Interrupt the programme
and rearrange items
which are obstructing the
spray arm.
Rattling noise. Items of crockery are
insecure in the wash
cabinet.
Interrupt the programme
and rearrange the items
of crockery.
Knocking noise in the
water pipes.
This may be caused by
the on-site installation or
the cross-section of the
piping.
This has no influence on
dishwasher function. If in
doubt contact a suitably
qualified plumber.
Problem solving guide
49
To Next Page
Loading...
