Miele G 898 User Manual

Technical Information
100
G 600/G 800
6. If the dishwasher door is opened and closed or the dishwasher is turned off and
on, the service mode will be canceled and the machine will continue to advance
normally.
6.8.5.2.1 Test Program
The test program is a program that allows the technician to check all of the major functions of
the dishwasher.
1. Access Service Mode 1.
2. Turn the program selector switch to the 11 o’clock position and press the Start button.
The test program will start and advance automatically.
3. Pressing the Start button repeatedly will allow the technician to advance through the
program. If the Start button is not pressed, the program will run automatically.
6.8.5.3 Service Mode 2
Service Mode 2 is used to determine which upper electronic is in the machine, to
change certain programmed functions and to access fault codes. The programmed
functions include setting the flow meter, increasing the water temperature, turning on
or off the water softener, increasing the water level, extending the circulation fan
time, adding an interim rinse, and setting the dishwasher width (18” or 24”).
1. To access Service Mode 2, close the door and turn the selector switch to Stop.
2. Turn the dishwasher off.
3. Press and hold the Top solo and Start buttons while turning the dishwasher on.
A dot (.) in the display and a flashing Intake/Drain light indicates successful
accessing of Service Mode 2.
4. Turn the program selector switch to the appropriate position in Table 6-28 to
access the various functions of Service Mode 2.
5. To save: Press the Top solo button twice, turn the program selector switch to
Stop and turn the dishwasher off.
Selector switch
position (o’clock)
Function Options Display
1 Fault codes - F00, F01, etc.
2 Operating hours - e.g., 007
3 Operating hours - e.g., 127
4 Flow meter 195 to 205 195 to 205
5 Increase temperature
150°F 50
160°F 51
6 Water softener
With
1
60
Without 61
7 Increase water intake
Without 70
With 71
8 2 interim rinses
Off 80
On 81
9 Extended drying fan time
2
Off 90
On 91
Table 6-28: G 681, G 881 Novo Stella, G 886 Novo Stella Plus Service Mode 2 Functions
1
Factory setting
2
Can only be extended if “+14 min” is selected in programming mode. See Section 6.8.5.1.

Miele G 898 Specifications

General

Brand	Miele
Model	G 898
Category	Dishwasher
Language	English