Miele G 898 User Manual

Technical Information
135
G 600/G 800
Program button Function Options Button light status
1 Heated drying
On
2
Off
Off On
2 Water hardness setting
See Section
6.8.15.1.3
1
Flashing = 1 to 70 gpg
Off = 0 gpg
4 Buzzer
On
2
Off
Off On
5 Water quantity
Normal
2
Off
Increased On
Table 6-83: G 879 Programming Functions for EPLZ 530
1
If no lights light up, the dishwasher is programmed to “without water softener”. To change to “with
water softener” follow the steps in Service Mode 2 (Section 6.8.15.3).
2
Factory setting
6.8.15.1.3 Setting the Water Hardness
1. Measure the water hardness in grains per gallon (gpg).
2. Access Programming Mode.
3. Press program button 2 (should be flashing). If program button 2 is not flashing, Service
Mode 2 must be accessed and the dishwasher programmed to “with water softener”.
4. Using the water hardness chart (Table 6-84), press the program button that corresponds
to the water hardness measured in Step 1, e.g., for a water hardness of 10 gpg, press
program button 4.
5. Once the button is pressed for the selected water hardness setting, program button 2 will
flash.
6. To save: Press the Top solo button twice. A flashing Top solo button indicates
successful saving of data.
7. Turn off the dishwasher.
Water hardness (gpg) Top solo button Program button pressed
1 - 4 Not pressed 1
5 - 6 Not pressed 2
7 Not pressed 3
8 - 10 Not pressed 4
11 - 12 Not pressed 5
13 - 14 Pressed 1
15 - 17 Pressed 2
18 - 21 Pressed 3
22 - 35 Pressed 4
36 - 70 Pressed 5
Table 6-84: G 879 Water Hardness Settings
6.8.15.1.4 Checking the Water Hardness Level
1. Access Programming Mode.
2. Press program button 2. A program button (1 to 5) will light up, indicating the water
hardness setting. Match the illuminated light to the water hardness chart (Table 6-84).
3. If a button does not light, press the Top solo button. The program button that lights up
along with the Top solo button will indicate the water hardness level setting.
4. Turn the dishwasher off.
6.8.15.2 Service Mode 1
1. To access the Manual Step Mode, open the dishwasher door and turn the
dishwasher off.

Miele G 898 Specifications

General

Brand	Miele
Model	G 898
Category	Dishwasher
Language	English