Installation work and repairs should only be performed by a qualified
technician in accordance with all applicable codes and standards. Repairs
and other work by unqualified persons could be dangerous and may void the
warranty.
The following faults can be corrected without contacting the Miele Service
Department:
Why is the display dark when the oven is first turned on?
Possible fault Fix
The appliance is not correctly plugged
in.
Check the plug.
The circuit breaker has tripped. Check the breaker.
The display setting is set to "Off". See "Settings - Clock".
What if the oven does not heat?
Possible fault Fix
The door is not shut completely. Close the door firmly.
The settings are not programmed. – Select a power level and time setting
for the microwave function.
– Select a power level and a time
setting for the microwave and a
temperature setting for a solo
function.
Why is there no noise when the oven door is opened?
This is normal. If the door is opened during operation, a safety contact switch
causes the heating elements and the fan to shut off.
Frequently asked questions
56
To Next Page
Loading...
Need help?
General
