Miele H 7140 BM User Manual

Problem solving guide
84
Problem Possible cause and remedy
The sensors do not
respond.
You have selected the Display| QuickTouch| Off setting.
When the oven is switched off, the sensors do not
respond.
 As soon as the oven is switched on, the sensors
will respond. If you want the sensors to respond
even when the oven is switched off, select the
Display| QuickTouch| On setting.
The oven is not connected to the power supply.
 Make sure that the plug is correctly inserted in the
socket and that the socket switch has been
switched to on.
 Check if the circuit breaker has tripped. Contact a
qualified electrician or Miele.
There is a fault with the control unit.
 Touch and hold the On/Off sensor until the
display switches off and the oven restarts.
Press OK for 6 seconds
appears in the display
when the oven is
switched on.
The system lock  has been switched on.
 You can deactivate the system lock for a
programme by touching the OKsensor for at least
6seconds.
 If you want to permanently deactivate the system
lock, select theSafety| System lock | Off setting.
Power cut appears in the
display.
There has been a brief power cut. This has caused
the current cooking programme to stop.
 Switch the oven off and then back on again.
 Restart the cooking programme.
12:00 appears in the
display.
The power supply was interrupted for longer than 150
hours.
 Reset the time and date.
Max. op. hours reached
appears in the display.
The oven has been operating for an unusually long
time. This has triggered the safety switch-off function.
 Confirm with OK.
The oven is now ready to use.
Faultand a fault code
not listed here appears
in the display.
A fault has occurred that you cannot resolve.
 Call Miele.

Miele H 7140 BM Specifications

General

Oven size	Small
Oven type	Electric
Bottom heating	-
Number of ovens	1
Total oven power	- W
Keep warm function	Yes
Number of shelf positions	3
Total oven(s) interior capacity	43 L
Door hinge	down
Cord length	2 m
Control type	Touch
Door material	Glass
Product color	Stainless steel
Control position	Front
Clock type	Electronic
Timer type	Digital
Lamp type	LED
Lamps quantity	1 lamp(s)
Current	16 A
Connected load	2200 W
AC input voltage	220 - 240 V
Energy consumption (conventional)	- kWh
Product type	Combination microwave
Door open type	Pull-down
Microwave power	1000 W
Appliance placement	Built-in
Number of power levels	7

Weight and Dimensions

Depth	563 mm
Width	595 mm
Height	456 mm
Weight	45000 g
Installation compartment depth	550 mm
Installation compartment width	568 mm
Installation compartment height	452 mm
Installation compartment width (min)	560 mm
Installation compartment height (min)	450 mm