Settings
34
Changing factory default
settings
Your appliance is supplied with a
num
ber of standard default settings
(see the "Settings overview" chart).
A setting is changed by altering its
status.
Settings can only be changed when
the oven
is switched on and the rotary
selector is at .
Select .
If necessar
y use the rotary selector to
move the triangle until it appears
under .
Confirm with OK.
will appear:
If you wish t
o change another setting,
use the rotary selector to select the
appropriate number.
Confirm with OK.
The setting is selected and the current
status appears, e.g. .
To alter the status:
Use the r
otary selector to select the
status you want.
Confirm with OK.
The selected status is saved and the
setting appears again.
If you wish t
o alter more settings,
proceed as described previously.
Select if you have not changed
one setting and wish to switch to
another.
Select if you do not want t
o
change any more settings.
The settings remain in the memory
even aft
er a power cut.
To Next Page
