Rapid Heat-up
Rapid Heat-up can be used to speed
up the heating-up phase.
Rapid Heat-up R switches on
automatically if you set the temperature
above 100 °C for Fan Plus U or Auto
Roast [.
The R sensor lights up.
Do not use Rapid Heat-up to pre-
heat the oven when baking pizzas or
delicate mixtures (e.g. small baked
goods with a high sugar content,
pizza, choux pastries, sponges).
These will get brown too quickly on
the top.
Touch the R sensor during the
heating-up phase to switch Rapid Heat-
up on or off:
^ Touch the illuminated R sensor.
"Heating-up" will appear in the display
instead of "Rapid Heat-up" and the
keypad illumination will go out.
Whilst "Heating-up" is visible in the
display, touching the non-illuminated R
sensor will switch "Rapid Heat-up" on
again.
Pre-heating the oven
It is only necessary to pre-heat the oven
in a few instances.
Most dishes can be placed in a cold
oven. They will then make use of the
heat produced during the heating-up
phase. If the recipe requires pre-
heating, place the food in the oven
once the temperature indicator light
goes out.
Pre-heat the oven when using:
Fan Plus U
– dark bread doughs,
– beef sirloin joints and fillets.
^ Select the required oven function and
the temperature.
^ Rapid Heat-up should be switched
off when baking pizza, biscuits and
small cakes.
^ Wait for the heating-up phase to
finish.
A buzzer will sound when the set
temperature is reached as long as the
buzzer is switched on (see "Settings -
Buzzer tones").
Place the food in the oven.
Functions without microwave power
65
To Next Page
Loading...
