^
Gently lift the top of the two middle
panes up and take it out.
^
Then lift the bottom of the two middle
panes up gently and take it out.
^
Clean the door panes and other
individual parts with a clean sponge
and a solution of hot water and
washing-up liquid or a clean damp
microfibre cloth.
^
Dry all parts with a soft cloth.
Then reassemble the door carefully:
The two middle panes are identical.
To help you put them back in
correctly the material number is
printed on the panes.
^
Refit the lower of the two middle
panes in such a way that the material
number is legible.
^
Flip both the glass pane retainers
inwards in such a way that they fit
over the lower of the two middle
panes.
^
Then refit the upper of the middle two
panes in such a way that the material
number is legible. The glass pane
should lie on top of the retainers.
Cleaning and care
115
To Next Page
Loading...
Need help?
General
