^ Remove screws a from the
underside of the appliance door.
^ Use the screws to secure both short
brackets b to the underside of the
appliance door. The bracket must be
flush with the exterior of the
appliance door.
(On framed doors use the longer
bracket, and if necessary shorten
them).
^ Screw adjuster strip a to the
furniture door.
^ Loosen the adjusting screws b until
there is a gap of 3.5 mm (see detail).
^ Hang the furniture door onto
adjusting screws b.
^ Secure the furniture door at the top
using screws c.
^
Secure the furniture door at the
bottom using two screws d fitted
through the bracket.
Installing the appliance
31
To Next Page
Loading...
