PerfectFresh zone
compartments
The compartments in the PerfectFresh
zone are on telescopic rails, and can
be removed for filling, emptying or
cleaning purposes.
^
Pull out the compartment as far as it
will go, and then lift it up and out.
Push the runners back in again to
avoid injury or damage.
^
Carefully pull out the lid between the
compartments slightly, and lift it
down and out.
^ To replace it, insert the compartment
lid from beneath into the holders, and
push it back into place.
To replace the compartment,
^
place it back on the fully extended
runners a. The front of the runners
must be right up against the front of
the compartment b.
^
Then push the compartment back in
c.
Adjusting the condiment
tray/bottle shelf
^
Lift the tray/shelf up and out of the
stainless steel frame to remove.
^
Push up the stainless steel frame,
and remove.
^
Replace the frame at the required
height. Ensure that it is securely
pushed back into position.
^ Some stainless steel frames can be
removed and refitted more easily if
they are held together with the rear
plastic frame and lifted up and out
(see picture).
^
Replace the tray/shelf in the frame.
The tray/shelf can be removed
completely and used as a serving tray
at the table.
Adjusting the interior fittings
33
To Next Page
Loading...
