The appliance is supplied with
right-hand door hinging. If left-hand
door hinging is required, the hinging
must be changed.
To change the door hinging, you will
need the following tools:
Two people are needed to change
the door hinging.
Removing the door handle
^
Pull door handle a towards you. Side
section b slides back.
^ Pull side section b firmly back out of
the guides on the mounting plate
(see arrow).
^ Undo the 4 (TX 15) screws in the
mounting plate, and remove the
handle.
^ Remove the cover caps from the
opposite side, and fit them into the
empty holes.
Changing the door hinging
52
To Next Page
Loading...
