For stainless steel surfaces on the
appliance, use the Original Miele
Care product for stainless steel
(available from Miele).
Do not let water get into the
electronic unit or the light.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Do not use a steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
To avoid damaging the outer
surfaces of your appliance, do not
use:
–
cleaning agents containing soda,
ammonia, acids or chlorides,
–
cleaning agents containing
descaling agents,
–
abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
–
solvent-based cleaning agents,
–
stainless steel cleaners,
– dishwasher cleaner,
– oven sprays,
– glass cleaning agents,
– hard, abrasive sponges and
brushes, e.g. pot scourers,
– dirt erasers,
– sharp metal scrapers.
Cleaning and care
26
To Next Page
