Miele K 9552 iD - Ventilation Gaps; Door Seal

^
Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
^
After cleaning, wipe the interior and
accessories with a damp cloth and
dry with a soft cloth.
Leave the door open to air the
appliance for a short while.
^
Stainless steel components can be
cleaned with the Original Miele Care
product for stainless steel.
^ Apply the Original Miele Care
product for stainless steel to stainless
steel panels and frames each time
you clean the appliance.
This will help to protect stainless steel
surfaces and prevent resoiling.
Ventilation gaps
^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the energy
consumption of the appliance.
Door seal
Do not use any oils or grease on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
The door seal should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
After cleaning
^
Replace all shelves and accessories
in the appliance.
^
Insert the plug in the socket, and
switch the appliance back on.
^
Switch on the SuperCool function for
a while so that the appliance can
cool down quickly.
^
Place food back in the appliance and
close the door.
Cleaning and care
28