All fitting instructions given are for a
right hand hinged appliance. If you
have converted the appliance to left
hand hinging you will need to adapt
these instructions accordingly.
Aligning the housing unit
The housing unit must be carefully
aligned using a spirit level before
installing the appliance. The unit
corners must be at right angles, as
otherwise the furniture doors will not
align correctly with the 4 corners of the
appliance. Align the furniture doors with
the hinges.
Preparing the appliance
^
Secure the fixing strip in position on
the appliance.
^ For niche widths up to 560 mm:
stick sealing strip a directly on to
the appliance, on the door opening
side.
^ For niche widths over 560 mm:
first stick profile b directly on to the
appliance, on the door opening side.
Then stick sealing strip a on to the
profile strip.
^
With 16 mm thick furniture walls
Clip the spacer pieces over the
hinges.
Installing the appliance
36
To Next Page
Loading...
Need help?
General
