Sliding the appliance into the
installation niche
If a side-by-side installation is
desired, connect the two appliances
together. See the Installation Manual
included with the "Merging Kit".
^ Open the bottom door.
^ To remove the stainless steel front,
loosen the two nuts and remove the
cover strip.
^ Unscrew the plinth.
^ To protect the corners of the
installation space, attach edge
protectors where needed (not
included).
^ Plug the appliance into the power
outlet a.
The plug of the appliance should be
easily accessible after installation.
If the plug is not accessible after the
appliance has been installed,
disconnection from the power
supply should be completed via the
circuit breaker.
In the case of side-by-side
installations, a separate outlet must
be used for each appliance.
Installing the appliance
70
To Next Page
Loading...
Need help?
General
