All repairs should be performed by a
trained technician in strict
accordance with national and local
codes. Any repairs or maintenance
performed by unqualified personnel
could be dangerous.
Some minor problems can be fixed
without a service call.
What if ...
... the burners do not ignite after
several attempts?
Check if:
^ the burners are assembled correctly.
^ the gas valve is open.
^ the burners are dry and clean.
^ the flame holes in the burners are
clean and unblocked.
^
the igniters are wet.
^
the cooktop is plugged in and that
the circuit breaker has not tripped. If
lack of power is the problem, the
cooktop can be lit with a match. See
"Using the cooktop during a power
failure".
... the flame goes out after being lit?
^
Check whether the burners are
assembled correctly.
^
Make sure the gas holes in the
burner ring are clean and open.
... the igniters no longer work?
^
Check that there is no residue
between the ignitor and the burner.
^
Make sure the ignitor is dry.
... the flame appears different than
usual?
^ Check whether the burners are
assembled correctly.
Frequently asked questions
17
To Next Page
Loading...
