EasyManuals Logo

Miele KM 362 G Installation Instructions

Miele KM 362 G
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
After changing the jets
^
Assemble the removed burner parts
in reverse order and check for leaks
by operating the burner without the
upper section of the hob in place
(use a match to ignite the flame).
^
Remove the burner parts again.
^
Then replace the upper section of the
hob.
^
Screw in the burner bases and
re-assemble the burner parts, making
sure they are in the correct order.
^
Replace the controls.
^
Finally ignite all the burners to check
that they are operating correctly.
The flame must not go out in the lowest
setting, or when the control is turned
quickly from a high to a low setting.
In the highest setting the flame must
have a distinctive and visible core.
Stick the label supplied with the jets
above the label stating the type of
gas being used.
Conversion to another type of gas
30

Other manuals for Miele KM 362 G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele KM 362 G and is the answer not in the manual?

Miele KM 362 G Specifications

General IconGeneral
BrandMiele
ModelKM 362 G
CategoryHob
LanguageEnglish

Related product manuals