Stainless steel surfaces
Clean stainless steel surfaces with a
solution of warm water and a little
washing up liquid applied with a soft
sponge. Soak stubborn soiling first to
loosen it. Wipe dry using a soft cloth.
A proprietary non-abrasive cleaning
agent designed specifically for use on
stainless steel may be used, if wished.
Follow the manufacturer's instructions.
To help prevent re-soiling, a
conditioning agent for stainless steel,
such as Neoblank (available from the
Miele UK Spare Parts Department) can
also be used. Follow the manufacturer's
instructions.
Thoroughly remove salty foods or
liquids from the stainless steel
surfaces as soon as possible to
avoid the risk of corrosion.
Ceramic surfaces
Spillages etc. should be cleaned off as
soon as possible.
Most soiling can be wiped off using a
damp cloth. Stubborn soiling may
needto be removed with a shielded
scraper blade.
Do not use washing up liquid on the
ceramic surface as it can leave a
blue sheen which may be difficult to
remove.
To remove any limescale deposits,
caused for example by water boiling
over and metallic marks (aluminium
deposits) apply a few drops of a
proprietary cleaning agent for ceramic
surfaces using a soft cloth or kitchen
paper towel. Follow manufacturer's
instructions on the packaging. The
Miele ceramic hob cleaner is available
from the Miele UK Spare Parts
Department.
Note that some cleaning agents contain
a protective additive designed to
prevent water marks and smears
adhering to the surface.
After cleaning wipe the hob surface
with a damp cloth and then dry it with a
clean soft cloth.
Cleaning and care
21
To Next Page
Loading...
Need help?
General
