Repairs to the gas and electrical
components of this appliance must
only be carried out by a suitably
qualified and competent person in
strict accordance with current local
and national safety regulations to
ensure safety. Repairs and other
work by unqualified persons could
be dangerous. The manufacturer
cannot be held liable for
unauthorised work.
What to do if...
... the burner does not ignite after
several attempts
Check whether
– the burner is correctly assembled.
– the gas supply tap is turned on.
– the burner is dry and clean.
–
the flame slits are dry and
unblocked.
–
the mains fuse has blown. If the fuse
has blown, contact an electrician or
the Service department. (The gas
can be lit with a match). (See "Using
your hob during a power cut").
... the gas flame goes out after being
lit
Check whether the burner cap is
correctly positioned.
... the ignitor on the burner does not
spark
Check whether food deposits have
lodged themselves between the ignitor
and the burner cap.
Carefully remove any soiling. Do not let
the ignitor get wet.
... the flame suddenly looks different
Check whether the burner is correctly
assembled.
Problem solving guide
25
To Next Page
Loading...
Need help?
General
