Pan supports, controls
Remove the pan supports.
Clean the pan supports and the
controls with a solution of hot water and
a little washing up liquid applied with a
soft sponge. Soak stubborn soiling first
to loosen it.
Finally, wipe dry using a soft cloth.
Ceramic surface
Wipe all coarse soiling off using a
damp cloth. Stubborn soiling may need
to be removed with a shielded scraper
blade.
Then apply a few drops of a proprietary
cleaning agent for ceramic surfaces
using a soft cloth or kitchen paper
towel. This way any limescale deposits,
caused for example by water boiling
over, are removed.
Finally wipe the hob surface with a
damp cloth and then dry it with a clean
soft cloth.
Note that some cleaning agents contain
a protective additive designed to
prevent water marks and smears
adhering to the surface.
Cleaning and care
16
To Next Page
Loading...
