Cooking zone sensors and displays
j Displays:
0 = Cooking zone ready for use
1 to 9 = Power settings (for switched on hob)
# = Residual heat
ß = No pan on cooking zone or pan unsuitable
(see "Induction")
F = Fault (see "Safety switch-off")
A = Auto heat-up when the power setting range has been extended
P0 etc. = Programme (see "Programming")
S0 etc. = Status (see "Programming")
k Indicator lamp for Auto heat-up or extended power setting (see "Programming"),
e.g. the front left cooking zone
l Indicator lamp for booster
m Sensor switch for booster
n Power setting sensor switches
Guide to the appliance
11
To Next Page
Loading...
Need help?
General
