Hours
Whole hours are set by touching the relevant number on the
numerical keypad.
Half hours are set by touching the area between the relevant
two numbers.
Example: You want to set 2 hours 30 minutes.
^
Switch the hob on.
^
Touch the m sensor.
00 will appear in the timer display. The 0 on the right will
flash.
^ Touch the h sensor, to change the display to show the
hours.
^
Touch the area between the numbers 2 and 3 on the
numerical keypad.
The timer display will light up constantly after a few seconds.
The minute minder time will begin to count down.
Timer
35
To Next Page
Loading...
