Installing the hob
^
Feed the mains connection cable
down through the cut-out.
^
Centre the hob b in the cut-out.
^
Connect the hob to the mains.
^
Check that the hob works.
^
Seal the remaining gap c with a
silicone sealant that is heat-resistant
to at least 160 °C.
For granite and marble tiles, only
use silicone sealant that has been
especially formulated for granite and
marble.
Observe the silicone sealant
manufacturer's instructions.
Flush-fitted hobs
77
To Next Page
Loading...
