Need help?Do you have a question about the Miele KM 7210 FR and is the answer not in the manual?
General| Hob type | Zone induction hob |
|---|---|
| Frame type | Full trim |
| Frame color | Stainless steel |
| Product color | Black |
| Top surface type | Glass-ceramic |
| Appliance placement | Built-in |
| Cooking zone 1 type | Simmer |
| Cooking zone 2 type | Large |
| Cooking zone 3 type | Regular |
| Cooking zone 1 boost | 1700 W |
| Cooking zone 1 power | 1400 W |
| Cooking zone 2 power | 2300 W |
| Cooking zone 3 boost | 3650 W |
| Cooking zone 3 power | 2100 W |
| Cooking zone 4 boost | 3000 W |
| Cooking zone 4 power | 1850 W |
| Cooking zone 1 position | Left rear |
| Cooking zone 2 position | Left front |
| Cooking zone 3 position | Right rear |
| Cooking zone 4 position | Right front |
| Number of cooking zones | 4 zone(s) |
| Large cooking zone shape | Rectangular |
| Simmer cooking zone shape | Round |
| Cooking zone 1 double boost | 2200 W |
| Cooking zone 4 power source | Electric |
| Number of gas cooking zones | 0 zone(s) |
| Simmer cooking zone diameter | 160 mm |
| Regular cooking zone diameter | 190 mm |
| Large cooking zone size (W x D) | 190 x 290 mm |
| Extra large high-speed cooking zone diameter | 220 mm |
| Boost function | Yes |
| Control type | Touch |
| Control position | Top front |
| AC input voltage | 230 V |
| Connected load (gas) | - W |
| Connected load (electric) | 7300 W |
Weight and Dimensions| Depth | 504 mm |
|---|---|
| Width | 764 mm |
| Height | 51 mm |
| Cord length | 1.4 m |
| Height under worktop | 11000 mm |
| Installation compartment depth | 490 mm |
| Installation compartment width | 750 mm |
| Installation compartment height | 48 mm |
Defines the intended use of the hob for domestic environments and specifies limitations for certain user groups.
Provides guidelines for supervising children and highlights specific hazards related to children using the hob.
Covers essential safety aspects related to installation, electrical connection, and general technical integrity of the hob.
Explanation of the induction heating technology and its mechanism.
Introduction to operating the hob using sensor controls and understanding basic interactions.
How to activate and deactivate the system and safety locks to prevent unintended operation.
Explanation of automatic safety switch-off mechanisms due to covered sensors or excessive operating time.
Details on the overheating protection mechanism for induction coils and cooling elements.
Specifies minimum clearances required above the hob for safety.
Details required clearances between the hob and surrounding units or walls.
Defines the necessary gap between the hob's underside and any cabinets or appliances below.
Information on the hob's total power rating and required connection data matching the mains supply.
Recommendations for RCD protection and requirements for disconnecting devices.
Methods for safely disconnecting the hob from the mains power supply for maintenance.
Specifications for the mains connection cable and safety warnings for its replacement.
Schematic diagrams illustrating the electrical wiring connections for the hob.
Guidance on contacting Miele service for troubleshooting and repairs.
To Next Page
